ECIL Hyderabad ITI Trade Apprentice Recruitment 2026 – Apply Online for 310 Posts

ECIL Hyderabad ITI Trade Apprentice Recruitment 2026 for 310 training seats

Vacancies: 310 apprenticeship seats · Job Type: Apprenticeship Training · Location: ECIL Hyderabad, Telangana · Apply: Online (MSDE portal, then ECIL) · Last Date: 11 October 2026, 11:59 PM · Stipend: Not printed · Fee: Not printed · Selection: ITI marks merit

Merit on ITI marks, with no written test in the advertisement: Electronics Corporation of India Limited (ECIL), a Miniratna (Category-I) public sector enterprise under the Department of Atomic Energy, Government of India, has invited online applications for 310 ITI Trade Apprentice seats at ECIL, Hyderabad. Advertisement No. 11/2026 is dated 30 September 2026. Training is under the Apprentices Act, 1961.

Only candidates residing in any district of Telangana may apply. The essential qualification is an ITI pass certificate, meaning an NCVT certificate, in the trade applied for. Age is reckoned as on 31 October 2026. Registration on apprenticeshipindia.gov.in is compulsory, and the ECIL online form is what the advertisement accepts.

The online window runs from 30 September 2026, 6:00 PM, to 11 October 2026, 11:59 PM. The advertisement marks later dates as tentative. Engagement is a one-year training. The notice states there is no obligation to employ apprentices after training, and no right to claim employment in ECIL.

⚠️ Application Alerts

  • MSDE registration alone is not the application. The advertisement says applications submitted on the ECIL website are the ones accepted.
  • Candidates who have already undergone, or are currently undergoing, apprenticeship under the Apprentices Act, 1961 in any organisation cannot apply.
  • Residence is limited to districts of Telangana. A candidate living outside the state is not eligible for this advertisement.
  • Selected candidates must execute a Contract of Apprenticeship. The notice says those who fail to complete training are liable to refund the training cost and the stipend received, as determined by the Central Apprenticeship Adviser.

Official Source Chain

On this page

Also Read: TISS Teaching Faculty Recruitment 2026 – Apply Online for 9 Professor, Associate Professor and Assistant Professor Posts

Who Should Apply?

Apply only if you live in a district of Telangana and hold an NCVT ITI pass certificate in the trade you select. The same age band applies across trades. The seats below are the totals printed in Advertisement No. 11/2026.

  • ITI (NCVT) Electronics Mechanic → Electronics Mechanic (EM) – 86 seats
  • ITI (NCVT) Fitter → Fitter – 87 seats
  • ITI (NCVT) Computer Operator and Programming Assistant → COPA – 41 seats
  • ITI (NCVT) Electrician → Electrician – 50 seats
  • ITI (NCVT) Welder → Welder – 16 seats
  • ITI (NCVT) Turner → Turner – 8 seats
  • ITI (NCVT) Machinist → Machinist – 7 seats
  • ITI (NCVT) Mechanic (Refrigeration and Air Conditioning) → RAC Technician – 5 seats
  • ITI (NCVT) Machinist (Grinder) → Machinist (G) – 2 seats
  • ITI (NCVT) Painter → Painter – 2 seats
  • ITI (NCVT) Carpenter → Carpenter – 2 seats
  • ITI (NCVT) Plumber → Plumber – 2 seats
  • ITI (NCVT) Diesel Mechanic → Diesel Mechanic – 2 seats

Reservation printed in the advertisement: 16 seats are horizontally reserved for PwD candidates. The degree of disability must be 40% or above. Vertical split is UR 125, EWS 31, OBC 84, SC 47, ST 23.

Who cannot apply: a person who does not reside in Telangana; a person who has already undergone or is undergoing apprenticeship under the Apprentices Act, 1961 in any government, PSU or private organisation; a person without an NCVT certificate in the trade; a person below 18 years, or above the category upper age, as on 31 October 2026.

The advertisement does not say a candidate may apply for more than one trade in one form. Select the trade that matches the NCVT certificate.

Important Dates

The advertisement heads this list as “Important Dates (Tentative)”. The How to Apply paragraph also states that the online process will be operational in the window below.

EventDate
Advertisement date30 September 2026
Online registration opens30 September 2026, 6:00 PM
Last date for online registration11 October 2026, 11:59 PM
Document verification22 October 2026 to 24 October 2026 (tentative)
Offer letters by email28 October 2026 to 29 October 2026 (tentative)
Apprenticeship training starts02 November 2026 (tentative)
Age reckoning date31 October 2026

No correction window is printed. A reprint of the registered form is allowed before the last date. No TA/DA is paid for document verification.

Quick Overview – ECIL ITI Trade Apprentice 2026

  • Organisation: Electronics Corporation of India Limited (ECIL)
  • Advertisement No.: 11/2026, dated 30 September 2026
  • Post: ITI Trade Apprentice (13 trades)
  • Seats: 310 (16 horizontal PwD seats)
  • Location: ECIL, Hyderabad – 500 062, Telangana
  • Sector: Miniratna (Category-I) public sector enterprise under the Department of Atomic Energy
  • Qualification: ITI pass certificate (NCVT) in the respective trade
  • Age: 18 to 25 years (UR) as on 31 October 2026; OBC 28; SC/ST 30; PwD +10 years
  • Stipend: Not printed in the advertisement
  • Fee: Not printed in the advertisement
  • Selection: ITI marks merit; 70% Government ITI and 30% Private ITI; then document verification
  • Training: One year from 02 November 2026
  • Who may apply: Residents of all districts of Telangana only
  • Apply online: Register on apprenticeshipindia.gov.in, then submit the ECIL form under Current Job Openings (open until 11 October 2026, 11:59 PM)
  • Notification PDF: Download ECIL ITI Trade Apprentice Advertisement 11/2026 PDF
  • Official website: ECIL Human Resources / current openings

What Posts Are Available? – ECIL Vacancy & Eligibility 2026

Fitter (87), Electronics Mechanic (86) and Electrician (50) account for 223 of the 310 seats. COPA has 41. Six trades have only 2 seats each, so a lower ITI score can still miss a shortlist in those trades. The advertisement prints the first trade as “ELECTRONICS MECHANIC(EM)”. That is the Electronics Mechanic row.

Of the seats, 70% are for Government ITI students and 30% for Private ITI students. That split is not shown trade-wise. PwD reservation is horizontal, not an extra 16 seats.

TradeSeatsUREWSOBCSCSTQualification
Electronics Mechanic (EM)8635823146ITI (NCVT) Electronics Mechanic
Fitter8736923136ITI (NCVT) Fitter
Computer Operator and Programming Assistant411741163ITI (NCVT) COPA
Mechanic (Refrigeration & Air Conditioning Technician)511111ITI (NCVT) RAC
Turner831211ITI (NCVT) Turner
Welder1672421ITI (NCVT) Welder
Machinist721211ITI (NCVT) Machinist
Machinist (G)210100ITI (NCVT) Machinist (G)
Painter210100ITI (NCVT) Painter
Electrician501951394ITI (NCVT) Electrician
Carpenter210100ITI (NCVT) Carpenter
Plumber210100ITI (NCVT) Plumber
Diesel Mechanic210100ITI (NCVT) Diesel Mechanic
Total31012531844723

ECIL may increase or decrease the notified seats. Qualifications must be from Indian institutes recognised by the appropriate statutory authority.

What Is the Age Limit?

Age is reckoned as on 31 October 2026. The minimum is 18 years. Upper limits printed in the advertisement are below. EWS has no separate limit in the text, so the General figure is the one printed for that column.

CategoryAge as on 31 October 2026
Minimum, all categories18 years
General / UR25 years
EWS25 years (no separate EWS limit printed)
OBC28 years
SC / ST30 years
PwD10 years extra over the category limit; disability 40% and above

Examples:

✅ A 24-year-old UR candidate born on 31 October 2002 is eligible (within the 25-year limit as on 31 October 2026).

❌ A 26-year-old UR candidate born on 30 October 2000 is not eligible (exceeds the maximum age by 1 year).

Use our Age Eligibility Calculator to check instantly.

What Is the Stipend?

Not specified in the notification. Advertisement No. 11/2026 does not print a monthly stipend, a pay level, or a consolidated amount. The figure, if any, will be in the engagement or contract papers.

The notice does mention stipend in one condition: candidates who fail to complete training are liable to refund the whole cost of training and the amount received as stipend, as determined by the Central Apprenticeship Adviser. No tax treatment is printed.

What Is the Application Fee?

No application fee is printed in Advertisement No. 11/2026. The notice does not name a payment portal, a category-wise charge, or an exemption table.

How to Apply?

Both steps are compulsory. The advertisement says applications submitted on the ECIL website are the ones accepted.

StepPortalWhat to do
1apprenticeshipindia.gov.inRegister as a candidate on the MSDE portal
2ECIL → Human Resources → Current Job OpeningsSubmit the ECIL online application
  1. Read Advertisement No. 11/2026 and confirm the NCVT trade, Telangana residence, and age as on 31 October 2026.
  2. Register on apprenticeshipindia.gov.in. The advertisement does not print an ECIL establishment code. Search on the portal after registration.
  3. Then open ECIL, go to Human Resources, and open Current Job Openings. Submit the ECIL form between 30 September 2026, 6:00 PM, and 11 October 2026, 11:59 PM.
  4. Take a printout of the registered form with the system-generated application number. A reprint is allowed before the last date. Note the number. A later email from ECIL will use the address given in this form.
  5. Keep the MSDE registration proof and the ECIL application number separate. They are not the same number.

No photo or signature file size is printed. The printout must be signed, with a recent colour passport-size photo affixed, when you are called for document verification.

Common Mistakes to Avoid

  • Stopping after MSDE registration. The advertisement will not treat that as the application.
  • Applying after an earlier apprenticeship under the Apprentices Act, 1961, including one still in progress.
  • Using a caste or EWS certificate that is not in the proforma hosted on ecil.co.in. OBC must be Non-Creamy Layer.
  • Waiting for a non-selection mail. The notice says no separate communication is sent on non-selection.
  • Paying anyone who offers an ECIL apprenticeship. The advertisement warns that selection is on merit only.

Suggested, not a notification rule: submit the ECIL form at least a day before 11:59 PM on 11 October 2026, and save a PDF copy of the acknowledgement.

ఈసీఐఎల్ హైదరాబాద్ ఐటీఐ ట్రేడ్ అప్రెంటిస్ భర్తీ 2026 – 310 సీట్లకు ఆన్‌లైన్ దరఖాస్తు

ఎలక్ట్రానిక్స్ కార్పొరేషన్ ఆఫ్ ఇండియా లిమిటెడ్ (ECIL) హైదరాబాద్‌లో ఐటీఐ ట్రేడ్ అప్రెంటిస్ శిక్షణ సీట్లు 310 ప్రకటించింది. ప్రకటన నం. 11/2026 తేదీ 30 సెప్టెంబర్ 2026. ఆన్‌లైన్ దరఖాస్తు 11 అక్టోబర్ 2026 రాత్రి 11:59 వరకు. తెలంగాణలోని జిల్లాల నివాసులకు మాత్రమే అర్హత.

ఎవరు దరఖాస్తు చేయవచ్చు? సంబంధిత ట్రేడ్‌లో ఎన్‌సీవీటీ ఐటీఐ ఉత్తీర్ణత తప్పనిసరి. ఫిట్టర్ 87, ఎలక్ట్రానిక్స్ మెకానిక్ 86, ఎలక్ట్రీషియన్ 50 సీట్లు ఎక్కువ. వయసు 31 అక్టోబర్ 2026 నాటికి కనీసం 18. సాధారణ అభ్యర్థులకు గరిష్ఠం 25, ఓబీసీకి 28, ఎస్సీ/ఎస్టీకి 30. పీడబ్ల్యూడీకి మరో 10 ఏళ్లు. వైకల్యం 40 శాతం మరియు అంతకంటే ఎక్కువ ఉండాలి.

ఎంపిక ఎలా జరుగుతుంది? లిఖిత పరీక్ష లేదు. ఐటీఐ మార్కుల మెరిట్ ఆధారంగా ఎంపిక. సీట్లలో 70 శాతం ప్రభుత్వ ఐటీఐ, 30 శాతం ప్రైవేట్ ఐటీఐ. తర్వాత సర్టిఫికేట్ తనిఖీ. శిక్షణ ఒక ఏడాది. పూర్తి చేసిన తర్వాత ఈసీఐఎల్ ఉద్యోగం హక్కు లేదు.

దరఖాస్తు ఎలా చేయాలి? ముందు apprenticeshipindia.gov.in లో నమోదు చేసుకోవాలి. ఆ తర్వాత మాత్రమే ecil.co.in లో Human Resources → Current Job Openings ద్వారా దరఖాస్తు. ఈసీఐఎల్ వెబ్‌సైట్ దరఖాస్తు లేకుండా పరిగణించరు. ప్రకటనలో స్టైపెండ్ మొత్తం, ఫీజు ముద్రించలేదు. వివరాలకు అధికారిక పీడీఎఫ్ చూడండి.

How Are Candidates Selected?

No interview stage is mentioned in Advertisement No. 11/2026. No written test is mentioned either. Selection is on ITI marks merit, then document verification.

  1. ITI marks merit. 70% of seats for Government ITI students and 30% for Private ITI students.
  2. Email intimation for document verification. The tentative window is 22 October 2026 to 24 October 2026. The exact date, time and mode will be hosted on ecil.co.in. Candidates must attend at short notice.
  3. Offer letters will be sent by email, tentatively from 28 October 2026 to 29 October 2026.
  4. At joining, a Police Verification Certificate from the Superintendent of Police of the district headquarters and a physical fitness certificate from a Civil Surgeon or Assistant Surgeon.

Venue printed for document verification: Electronics Corporation of India Limited, Corporate Learning & Development Centre (CLDC), Nalanda Complex, TIFR Road, ECIL, Hyderabad – 500 062. Phone: 04027186454 / 2279.

False documents or suppression of facts can lead to rejection. A shortcoming noticed after training starts can lead to termination. Canvassing means immediate rejection.

The SahisarkariJobs.in Analyst’s Take

This is a one-year trade apprenticeship at the Hyderabad unit, not a regular ECIL recruitment. The advertisement itself says training follows the Apprentices Act, 1961, and that completion creates no employment obligation and no claim on an ECIL job. Shortlisting is based on the ITI marksheet, split 70:30 between Government and Private ITI students, with no written exam in this notice.

Best fit: a Telangana resident who already holds an NCVT certificate in Fitter, Electronics Mechanic, Electrician or COPA, can attend document verification in Hyderabad at short notice, and wants shop-floor training at a Department of Atomic Energy enterprise.

Skip this if you live outside Telangana, you have already done or are doing an apprenticeship under the 1961 Act, or you need a regular ECIL appointment from this advertisement. The notice does not provide that path.

Practical tip: finish the MSDE registration, then submit the ECIL form, and store both numbers before 11 October 2026, 11:59 PM. Watch the email ID entered in the form. Document verification is intimated by email, and the advertisement says candidates must attend at short notice.

Related: ECIL recruitment, Telangana government jobs, apprenticeship training.

Also Read: IRCTC Mumbai Apprentice Recruitment 2026 – Apply Online for 27 COPA, Procurement, HR & Marketing Seats

What Documents Are Required?

Carry originals and one set of photocopies to document verification.

  • Registered ECIL application form, signed, with a recent colour passport-size photo affixed
  • MSDE registration proof
  • Date of birth certificate
  • Government photo identity (Aadhaar, driving licence, passport, or similar)
  • ITI pass certificate (NCVT) in the trade
  • Latest caste certificate, if applicable: SC, ST, OBC (Non-Creamy Layer) or EWS, in the proforma hosted on ecil.co.in
  • PwD certificate, if applicable, showing disability of 40% and above

At joining, not at the application stage: Police Verification Certificate from the SP office of the district headquarters, and a physical fitness certificate from a Civil Surgeon or Assistant Surgeon.

Document alert: OBC must be Non-Creamy Layer. Category certificates must follow the ECIL proforma. A certificate in another format can be rejected at verification.

What Happens After Selection?

  1. Merit is prepared on ITI marks, with the 70% Government ITI and 30% Private ITI split printed in the advertisement.
  2. Shortlisted candidates get an email for document verification at CLDC, Nalanda Complex, TIFR Road, ECIL, Hyderabad – 500 062. The tentative dates are 22 October 2026 to 24 October 2026. No TA/DA is paid.
  3. Offer letters will be sent by email, tentatively on 28 October 2026 and 29 October 2026.
  4. Before joining, submit the Police Verification Certificate and the fitness certificate. ECIL describes itself here as a highly protected establishment.
  5. Before training starts, execute a Contract of Apprenticeship. Training is one year from 02 November 2026. Withdrawal is not allowed except for reasons beyond the candidate’s control.
  6. After the training period, a practical test determines proficiency in the trade. The National Apprenticeship Certificate is issued by the Ministry of Skill Development and Entrepreneurship only if that test is passed.
  7. The advertisement states there is no obligation to employ the apprentice, and no right to claim employment in ECIL after training.

Those who fail to complete training are liable to refund the training cost and the stipend received, as determined by the Central Apprenticeship Adviser. The notice does not print a joining timeline beyond these tentative dates.

Contact & Helpline

Document verification contact printed in the advertisement: Corporate Learning & Development Centre (CLDC), Nalanda Complex, TIFR Road, ECIL, Hyderabad – 500 062. Phone: 04027186454 / 2279.

The advertisement does not print a recruitment email or helpline timings. Future correspondence is only through the email id given in the online form. Quote the system-generated application number. The notice is signed by the Deputy General Manager-HR/CLDC. Corrigendum, if any, will appear only on ecil.co.in under Human Resources.

Courts at Medchal-Malkajgiri district, Telangana, have jurisdiction over disputes from this advertisement.

⚠️ Contact details sourced from the official notification. Verify before contacting. NEVER pay any money over the phone or to any person claiming to offer job assistance. Report fraud to cybercrime.gov.in.

FAQs

What is the last date to apply for ECIL ITI Trade Apprentice 2026?

11 October 2026, 11:59 PM. Online registration opened on 30 September 2026 at 6:00 PM. The dates table in the advertisement is marked as tentative. No extension has been announced as of 01 October 2026. Check Human Resources on ecil.co.in before you submit.

What is the age limit for ECIL ITI Trade Apprentice?

25 years for General candidates as of 31 October 2026. The minimum is 18. OBC is 28 years, and SC/ST is 30 years, as printed. PwD candidates get 10 more years if disability is 40% or above. No separate EWS age is printed.

Is there an exam for this ECIL apprenticeship, or is it interview-based?

No exam and no interview are mentioned. Selection is based on ITI marks merit, then document verification. 70% of seats are for Government ITI students and 30% for Private ITI students. The call for verification comes by email.

What is the stipend for ECIL ITI Trade Apprentice?

Not printed in Advertisement No. 11/2026. No monthly figure, pay level, or consolidated amount is given. The engagement papers are where a figure would appear. The notice does say that the stipend received can be recovered if training is not completed.

Can final-year students apply for ECIL ITI apprentice seats?

The essential qualification printed is an ITI pass certificate (NCVT) in the trade. The advertisement does not say that result-awaited candidates may apply. A candidate who does not yet hold the pass certificate should not assume eligibility.

Is ECIL ITI Trade Apprentice a permanent government job?

No. This is a one-year apprenticeship training engagement under the Apprentices Act, 1961. The advertisement says there is no obligation to employ apprentices after training, and no right to claim employment in ECIL. It does not use the phrase “permanent government job”.

Can candidates from other states apply for this ECIL recruitment?

No. The advertisement says candidates residing in all districts of Telangana only are eligible. A candidate living in another state does not meet that condition, as per the wording printed.

Where will I be posted if I get selected?

At ECIL, Hyderabad. Training is at the Hyderabad unit named in Advertisement No. 11/2026. Document verification is at CLDC, Nalanda Complex, TIFR Road, ECIL, Hyderabad – 500 062. No other posting station is printed.

What should I know before applying?

The honest downside is that this is training, not an ECIL job. Completion gives no claim to employment. Candidates selected for training must execute a Contract of Apprenticeship, and those who fail to complete are liable to refund the training cost and the stipend received. Residence is limited to Telangana.

Can I apply if I have already completed an apprenticeship?

No, if that apprenticeship was under the Apprentices Act, 1961, in any government, PSU or private organisation. The same bar covers training still in progress. The advertisement makes this an eligibility condition, not a preference.

Is an ITI trade apprenticeship the same as a PSU job?

Not on this advertisement. ECIL is a Miniratna public sector enterprise, but the engagement is one-year trade training. A practical test after training leads to a National Apprenticeship Certificate from MSDE only if passed. The notice separates that certificate from any employment claim.

Pre-Apprenticeship Checklist – Before You Apply

Use this checklist before you apply:

  • You meet the age band as on 31 October 2026 and hold an NCVT certificate in the trade.
  • You understand this is a one-year apprenticeship training engagement and the advertisement makes no employment claim after completion.
  • You are ready for hands-on training in the ITI trade you select, at ECIL Hyderabad.
  • You understand the stipend amount is not printed in the advertisement, and that non-completion can lead to a refund determined by the Central Apprenticeship Adviser.
  • You can maintain attendance for the training period under the Apprentices Act, 1961, and can produce police verification and a fitness certificate at joining.

📄 Primary source: ECIL official notification PDF, released 30 September 2026. The recruitment facts above are drawn from that notification; practical tips are labelled separately where they appear.

🔔 Get daily govt job alerts — follow us
Meena Patel
Meena Patel

Meena Patel is a government recruitment researcher at Sahi Sarkari Jobs. She holds a BMS degree and has reviewed 50+ central and state government notifications since 2025, covering banking, defence, PSU, state PSC and technical recruitments. Every article she publishes is verified against the official notification PDF before going live. Her coverage spans SSC, UPSC, IBPS, Railway, State PSC, CAPF and PSU recruitments across India.

📍 More Telangana Jobs ✕